Our heat alarms use technology that senses fire by air temperature rather than responding to particular matter. Contractors appreciate the design similarities - such as the Quick Connect wiring harness and other easy installation features - to Firex smoke alarms, whcih make installing a heat alarm simple. Firex heat alarms can be combined in an integrated system with Firex smoke and CO alarms for maximum protection.

FEATURES

Thermistor design - sensitive only to tempaerature; when the temperature reaches 57oC or greater, the alarm is triggered.

9 volt battery back-up - added protection in the event of a power failure.

Interconnectability - compatible with other AC/DC Firex heat alarms, smoke alarms, smoke/CO combo alarms, and carbon monoxide alarms.

Quick connect wiring harness - easy to replace or move alarms quickly.

Tamper-resistant locking device - smoke alarm locks to mounting bracket to prevent removal of unit.

Heat alarms are sensitive only to a fixed temperature, resulting in less nuisance alarms due to contamination, dust and insects.

Twin LEDs - green 'power-on' LED confirms constant AC power and the red LED displays alarm and battery status.

Note: Heat alarms should always be interconnected with smoke alarms to provide early warning when fire is present. Firex heat alarms are designed to alarm when presented with a certain temperature at the alarm. They will not react to smoke and should not be used to replace smoke alarms, but as a supplement to a complete smoke alarm system.